Magnetometer Cone (MagCone)
A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field. The Earth’s magnetic field (the so magnetosphere) varies from place to place, for various reasons such as inhomogeneity of rocks and the interaction between charged particles from the Sun and the magnetosphere. A mass of ferromagnetic material creates a detectable disturbance in this magnetic field. This magnetic anomaly produces a weak, alternating magnetic field that is picked up by the magnetometer, amplified electronically, and fed to the CPT-Logger and subsequently recorded on a computer. Gouda Geo-Equipment is specialized in the manufacturing of these essential products.
Magnetometers are typically used in ground-based electromagnetic geophysical surveys (such as magnetotellurics and magnetic surveys) to assist with detecting mineralization and corresponding geological structures and the detection of buried or submerged objects.
Use our specialized equipment for your next job
If you are interested in using our magnetometer for your specialist job, please do not hesitate to contact us by either calling (0)715 318 475 or sending an email to firstname.lastname@example.org. Gouda Geo-Equipment is available 24/7. Therefore, you can always count on our team of experience professionals to help you out with selecting suitable materials for your next job or soil investigation.
The magnetometer can either be equipped with a dummy tip or mounted on top of a P15CFPTxy piezocone made of a high-grade, non-magnetic steel. Due to its high strength and small diameter (44 mm), the MagCone is a penetrometer that is capable of penetrating soils up to greater depths with relative ease. The MagCone can, in the configuration with the piezocone, also collect CPTu data, such as cone tip resistance (qc), lateral sleeve friction (fs) and in-situ pore pressure (p) needed to produce soil profiles and pile designs simultaneously in one operation. This saves the cost of running two operations.
The MagCone and piezocone share the same CPT sounding cable for data transmission to the surface and fit directly on the CPT-Logger data acquisition unit. The CPT-Explorer data acquisition software fully supports the magnetometer and produces magnetometer test results graphed against depth in an Excel-format for further processing. The MagCone allows for triaxial magnetometer testing for magnetic anomaly modelling. The magnetic field is measured in three orthogonal directions and a resultant is calculated as well. Furthermore, the gradient of the resultant will be calculated, which gives a much better indication of changes in the magnetic field.
As the magnetometer survey begins, the module containing the tri-axial magnetometer and, if mounted, the P15CFPTxy piezocone is pushed into the ground by means of a CPT penetrometer rig. The MagCone can detect magnetic anomalies up to 2 m away laterally so that each probe position clears a vertical cylinder of land up to 4m diameter. The MagCone magnetometer generates data from all three directions and transmits these signals separately to surface so that the anomalies can be fully modelled using geophysical software to define the source and character of any anomaly. If your magnetic cone needs to be calibrated, you can count on us for a careful cone calibration.
The MagCone has two major advantages over other systems for magnetic anomaly modelling, such as:
- In situ tests are done without pre-drilling or any other preparation
- It obtains both geotechnical and magnetic field data simultaneously in one single push
Since the magnetometer senses variations in the subsurface magnetic field materials and relays these variations to a geophysicist in real-time, it is an excellent tool to identify metal targets to depths exceeding 20 m in soft sediments. This high-resolution method using our geotechnical instruments has proved to be very suitable for:
- Determination of the driving depth of foundation piles
- Determination of the length of sheet piles
- Determination of the position of retaining or tieback anchors
- Determination of the position of power cables
Advanced processing provides the option of producing a detailed 3D model of site hazards.
- Fluxgate sensor in XYZ direction enables to determine the position and orientation of an object
- Measuring range 100,000 nT or 250,000 nT
- Sensitivity 1 nT
- Accuracy better as 0,5% of the full scale (FS)
- Resolution better as 5nT (10nT for the 250,000 nT version)
- Noise level less than 20 pT
- Built-in bidirectional inclinometer in line with the XY sensors with a measuring range of +/- 25° (accuracy better as 0.1°) for determination of the orientation of the magnetic field
- Length of the magnetometer module 350mm (excl. electric cone or dummy tip)
- Length in combination with a dummy tip 500 mm
- Length in combination with a non-magnetic S15 type (piezo-)cone 750 mm
- Diameter 44mm
- Non-magnetic housing
- “North” marking on the exterior of the housing (Y-axis)
- Standard tapered thread on top for connection to the string of CPT sounding tubes
- Resolution in Z-axis direction 10 mm
CPT-Explorer data acquisition software allows the operator to enlarge/decrease the scale during testing such for optimum presentation of the graph.
The geophysicist should monitor the magnetometer wireless CPT tests; he can view all datasets and soil profile being plotted in real-time on the computer screen whilst the MagCone is being pushed. If a suspicious magnetic anomaly comes into view, the test may be stopped and the anomaly is to be identified by excavation if necessary.
It is extremely important to be well-aware that the interpretation of magnetometer data is a specialist job and is not to be judged lightly.